TO CHANGE SCREENS
1 PRESS S
2 PRESS SCREEN DESIGNER
3 PRESS SCREEN TAB ALONG TOP OF SCREEN
4 SELECT SCREEN FROM LIST YOU WANT TO PROGRAM
TO MAKE BUTTON A PLU
PRESS PGM TAB AT TOP OF SCREEN
PRESS BUTTON
PRESS GREEN KEY BUTTON ( in key program box)
PRESS PLU
PRESS PLU FROM LIST THAT YOU WANT THAT BUTTON TO BE
PRESS OK
TO CHANGE SCREEN DESCIPRTION OF A BUTTON
This would be used if you wanted the buttons to read the bin numbers for a wine
list but it will still print the proper name of the wine on the customers receipt.
PRESS PGM TAB AT TOP OF SCREEN
PRESS BUTTON YOU WANT TO CHANGE DESCIRPTION
PRESS YELLOW KEY BUTTON ( at screen description)
TYPE IN WHATEVER YOU WANT BUTTON TO READ PRESS OK
To Next Page
Loading...
Need help?
General
