SAMLEX AMERICA INC. | 83
SECTION 4 | Parameter Setup
4.7.2.7 DETECT TIME 3 (Table 4.8, Parameter Setup Screen No.7)
This is the time limit in cycles up to which high AC input voltage "CUT-OFF VOLT 3"is allowed.
4.7.2.7.1 Programming Steps for Parameter "DETECT TIME 2"
ð ð
E V O - 1 2 1 2 F I n v e r t i n g
A C o u t p u t : 1 2 0 . 0 V
< 0 . 1 0 A
6 0 . 0 0 H z
Enter Key Down Key x 6 times
Any Operating Mode Screen from
Fig 3.1 to 3.5
[Above screen is Screen 1 of Fig 3.2(a)]
Password 8052
See Section 4.3.1
See Table 4.8, Parameter Setup
Screen No. 7
for programmable range
S e l e c t G r o u p
* C H A R G E C U R V E
ð
S e l e c t P a r a m e t e r
* I N P U T H I G H L I M I T
ð
S e l e c t P a r a m e t e r
I N P U T H I G H L I M I T
* R E S E T V O L T A G E
1 2 5 . 0 V
S e l e c t P a r a m e t e r
I N P U T H I G H L I M I T
* D E T E C T T I M E 3
1 c y c l e
Down Key x 3 times
Enter Key
P a s s w o r d k e y i n
0 0 0 0
ð
Enter Key
S e l e c t P a r a m e t e r
I N P U T H I G H L I M I T
* D E T E C T T I M E 3
1 c y c l e
ð
Enter Key
4.8 GROUP 5 PARAMETER SET UP: OTHER FUNCTIONS
4.8.1 Programming Ranges and Default / Factory Preset Values of Parameters under Group 5 -
OTHER FUNCTION
Table 4.9 gives details of programming ranges and default values of parameters under Group 5 - OTHER FUNCTION.
Refer to Fig 4.4 under Section 4.1.3.3 for Menu Map for navigating through the various parameters under this Group.
To Next Page
Loading...