Sammy Mighty Driver - TROUBLESHOOTING AND PARTS; Error Codes and Solutions

CE
Card
or Ticket
Empty
Check
the Card
or Ticket
Dispenser.
lf
empty, re-fill
the
Cards
or Tickets
and
press
RESET
switch
to
payout
remaining
number
of
Cards or
Tickets. Do
not
power
off because
remaining
number
will
be
cleared.
CJ
Jamming
of
Card
or Ticket Dispenser
Check
the Card
or Ticket Dispenser,
clear
the
jam
of Cards
or Tickets
and re-power
on the
game.
E1
Coin
Switch Error
Check
the Coin
Mech. Any
jamming
in the
coin
or token
in there
or no[?
Correit
and
re-power
on the
game.
E2
Magnet
Error
This is
error
code when
the Magnet
base is
off from
the X-Mech.
Unit.
Open Playfield
dome
and
check
the Car Assy
mounting.
E3
EP-ROM
Error
Data
writing Error.
Press
RESET
switch
to
clear. lf
error is not
cleared,
need to
exchange
the Main PCB.
E4
Malfunction
of
X Mech.
Check
wiring
and
pin
connection
of X-
Mech.
connector.
Or Check
output for
Power
supply
assy.
E5
Malfunction
of
Belt
Unit
Problem
with Belt
Unit"
Check if motor
is
turning
or not. Check
harness
of Belt motor
Assy.
E6
Card
or Ticket
Dispenser
Error
Check
the
Card or Ticket
Dispenser
harness,
connection...
etc. Or
exchange
the
Unit.
E7
Belt
Home
positioning
or Adjustment
Sensor
Error
Check
the
sensor connector, harness
and
wiring.
Or exchange
those sensors.
EB
X-Limit
Sensor Error
Check
the Harness
or Limit
switch of X-
mech.
Unit. Or
exchange
the
X-Limit
Sensor.
E9
Switch
Error
This
error
code
appears when
the
SERVICE
and RESET
switches are kept
on
over
'10
sec.
after
powering
on the
game.
Check those
switches continuity.
EA
Belt
speed
Error
lf
EA
error appears
after
game
over,
check
Photo
Reflector. (Dirty,
scratch
on Sensor
or broken.)
Press
RESET
switch
to clear
error code.
lf
Error
still
exists,
check
above again.
10