Sammy Mighty Driver - HANDLING AND INSTALLATION; Setup Requirements and Safety

The Mighty
Driver redemption
game
is an indoor
game
machine-
lt is not
designed
for outdoor use"
Avoid installing the
game
in the following
locations:
a
Locations subject to
rain or water damage
a
Locations in
direct sunlight
a
Locations subject to extreme
heat
a
Locations near hazardous
or flammable
liquids or chemicals
You will need the following
minimum dimensions
for egress
into
your
location:
60
inches in height
25 inches in width
INSTALLATION
Unpack
your
game
carefully.
Be careful
of the shipping
staples.
They can be sharp.
Your
game
is
assembled
and should
not need
any assembly.
Levelyour
game
using enclosed
Leg levelers.
Prizes
willthen
fall
properly.
The standard
voltage for U.S. and
Canada
120V I 125V
-
3A;
Europe
220V 1240V
-24.
Use of
extension cords
is
prohibited.
Use
only a
grounded
outlet. YOUR GAME
MUST
BE GROUNDED!!!
The minimum
space required
for operation
in
your
locations should
be:
.
80,,high
a
30"
wide
t
60"
depth
THE GAME
MUST BE LEVEL.
IF THE
GAME
IS NOT ON
A LEVEL SURFACE,
THE TILT
SYSTEM
WILL MALFUNCTION.
USE A
LEVEL TO AVOID
NEEDLESS
ADJUSTMENTS.
SAFETY
PRECAUTIONS
a
Be sure to
turn the
power
off or
unplug the
game
before working
on the
unit.
a
Do not unplug
game
by
pulling
on
the line cord.
a
Replace
line
cord
if the
insulation
is damaged
in any
way with one
of equal
quality.
t
Replace
open fuses
with same
type and
rating.
t
Re-check
and
re-seat all harness
connections.
i
a