2019_07_22-10:00
2
836 829 R. 07/19
SAMOA Industrial, S.A. · Pol. Ind. Porceyo, I-14 · Camino del Fontán, 831 · 33392 - Gijón - Spain · Tel.: +34 985 381 488 · www.samoaindustrial.com
EN
• This unit is intended for professional use. Read all the
instructions in this manual prior to use.
• Only use the unit for the purposes for which it is intended.
• Do not alter or modify the unit.
• Do not exceed the maximum unit working pressure.
See page 6 of the technical specifications.
• Use the unit with fluids and solutions which are
compatible with the moist parts of the unit. See the
relevant section of the technical specifications.
• Observe the manufacturer’s safety warnings for the
fluids used.
WARNING: Release all pressure within the
system prior to performing any maintenance or
disassembly operation.
• The control valve is designed to dispense a variety of
fluid lubricants and antifreeze fluid.
• The control handle allows a progressive openning valve
for better control of oil delivery. The valve can be locked
in open position by means of the trigger button.
• The gun includes protection to prevent accidental
opening. Refer to the operation section for details of
operation.
• All guns include 1/2” BSP threaded swivel, a swivel
cover and nozzle extension outlet with automatic or
quarter turn opening non-drip tip.
INTRODUCTION
!
369224
369226
369228
369230
369232
369234
Part No. Description Extension
363112 Oil control handle with flexible outlet and automatic non-drip tip. 369224
363113 Oil control handle with flexible formable outlet and automatic non-drip tip. 369226
363114 Oil control handle with 90º flexible outlet and quarter turn opening non-drip tip. 369228
363115 Oil control handle with 90º flexible outlet and automatic non-drip tip. 369230
363116 Oil control handle with 60º rigid outlet and quarter turn opening non-drip tip. 369232
363117 Oil control handle with flexible formable outlet and quarter turn opening non-drip tip. 369234
To Next Page
Loading...