To Next Page
T
thomasmontgomeryAug 4, 2025
Why is the flow slow in my Samoa 363100 Tools?
- JJessica WyattAug 4, 2025
If you're experiencing slow flow with your Samoa Tools, several factors could be the cause. First, check the strainer, if installed, for clogs and clean or replace it. Low pump pressure can also lead to slow flow, so increase the pump air pressure. Inspect the valve for damage or foreign material on the seal; clean the seat valve or replace the valve if necessary. Also, inspect O-rings for wear or damage and replace them as needed. Finally, ensure the swivel is tightened and replace the swivel O-ring if it's worn or damaged.
General