What to do if SamplexPower Inverter has no AC output and the power LED is off?
If your SamplexPower Inverter shows no AC output, the green "POWER" LED is off, and the buzzer is silent, start by checking the DC input terminals for voltage. Ensure the battery input circuit has continuity and that all connections are secure. Also, inspect the internal and external DC input fuses and replace them if they are blown.
Why SamplexPower Inverter doesn't work after reversing DC input polarity?
If your SamplexPower Inverter isn't working after a reverse polarity connection, the external and internal fuses may have blown. Replace them. If the unit still fails to operate after replacing the fuses, call Technical Support for repair, as reverse polarity may cause permanent damage not covered by warranty.
General| Brand | SamplexPower |
|---|---|
| Model | PST-600-12 |
| Category | Inverter |
| Language | English |
Explains safety symbols used throughout the manual for user guidance.
Covers general safety guidelines for installation, electrical shock prevention, and environment.
Details specific safety precautions related to inverter operation, AC output, and DC input.
Provides definitions of electrical terms and concepts relevant to inverter operation.
Describes and illustrates pure sine wave output compared to modified sine wave.
Highlights benefits of pure sine wave output for various devices and applications.
Lists devices that may not work properly or could be damaged by modified sine wave output.
Explains continuous and surge power ratings and how to determine inverter power requirements.
Discusses electromagnetic interference generated by the inverter and FCC compliance standards.
Provides methods to minimize EMI effects through correct installation practices.
Explains the nature of SMPS, including inrush current and crest factor.
Outlines the inverter's basic function of converting DC to AC voltage.
Details the characteristics of the pure sine wave AC output.
Explains the two-stage conversion process from DC to AC using PWM techniques.
Illustrates and identifies the front and back panel components and connections of the inverter.
Basic description of lead acid batteries and their electrochemical reactions.
Details different types of lead acid batteries: SLA/VRLA, Non-Sealed, SLI, and Deep Cycle.
Explains battery capacity specified in Ampere-hours (Ah) and Reserve Capacity (RC).
Defines and provides examples of C-rates for battery charge and discharge.
Discusses SOC estimation via standing voltage, low battery alarms, and shutdown conditions.
Covers battery installation, depth of discharge effects, sizing the battery bank, and charging methods.
Specifies requirements for the working environment, ventilation, and temperature.
Details the allowed and prohibited mounting orientations for safety and proper function.
Provides the physical dimensions and mounting slot locations of the inverter unit.
Covers preventing DC input over-voltage, reverse polarity, cable sizing, and fuse protection.
Explains AC output connections, GFCI operation, testing, and fault handling.
Describes providing backup power using transfer switches and proper grounding procedures.
Details the use of optional remote controls and external ON/OFF switching methods.
Instructions for locally and remotely switching the inverter ON and OFF.
Guidance on the correct sequence and timing for connecting AC loads to the inverter.
Explains the operation and control of the inverter's cooling fan based on temperature.
Describes the meaning of indicator LEDs for normal inverter operation.
Information on the current drawn by the inverter when no load is connected or switched off.
Details protections against power surges, overloads, and short circuits.
Explains protection mechanisms for low and high DC input voltage conditions.
Covers inverter shutdown due to over-temperature and GFCI ground fault protection.
Explains reverse polarity damage and the function of internal DC side fuses.
Provides a guide to diagnosing and resolving common inverter symptoms and problems.
Lists the detailed electrical, environmental, and physical specifications for the inverter models.
Outlines the terms, conditions, and duration of the product's limited warranty.
To Next Page