Samson 3251 - Page 93

EB 8051 EN 14-7
Revision no. 02
Classification: Public · SAMSON AKTIENGESELLSCHAFT · Weismüllerstraße 3 · 60314 Frankfurt, Germany
Page 1 of 1
Declaration of Conformity of Final Machinery
in accordance with Annex II, section 1.A. of the Directive 2006/42/EC
For the following products:
T ypes 3251-1/3251-AM -1 and 3251-7/3251-AM -7 Pneumatic Control Valves consisting
of the Type 3251/3251-AM Valve and Type 3271/Type 3277 Pneumatic Actuator
We hereby declare that the machinery mentioned above complies with all applicable requirements
stipulated in Machinery Directive 2006/42/EC.
For product descriptions of the valve and actuator, refer to:
- Type 3251/3251-AM Valve (DIN): Mounting and Operating Instructions EB 8051
- Type 3251/3251-AM Valve (ANSI): Mounting and Operating Instructions EB 8052
- Types 3271 and 3277 Actuators: Mounting and Operating Instructions EB 8310-X
Valve accessories (e.g. positioners, limit switches, solenoid valves, lock-up valves, supply pressure
regulators, volume boosters and quick exhaust valves) are classified as machinery components in this
declaration of conformity and do not fall within the scope of the Machinery Directive as specified in
§ 35 and § 46 of the Guide to Application of the Machinery Directive 2006/42/EC issued by the
European Commission. In the SAMSON Manual H 02 titled "Appropriate Machinery Components for
SAMSON Pneumatic Control Valves with a Declaration of Conformity of Final Machinery", SAMSON
defines the specifications and properties of appropriate machinery components that can be mounted
onto the above specified final machinery.
Referenced technical standards and/or specifications:
- VCI, VDMA, VGB: "Leitfaden Maschinenrichtlinie (2006/42/EG) – Bedeutung für Armaturen,
Mai 2018" [German only]
- VCI, VDMA, VGB: "Zusatzdokument zum „Leitfaden Maschinenrichtlinie (2006/42/EG) –
Bedeutung für Armaturen vom Mai 2018" [German only], based on
DIN EN ISO 12100:2011-03
Comment:
Information on residual risks of the machinery can be found in the mounting an d operating
instructions of the valve and actuator as well as in the referenced documents listed in the mounting
and operating instructions.
Persons authorized to compile the technical file:
SAMSON AG, Weismüllerstraße 3, 60314 Frankfurt am Main, Germany
Frankfurt am Main, 9 January 2024
Norbert Tollas
Senior Vice President
Global Operations
Peter Scheermesser
Director
Product Maintenance & Engineered Products