Samson 4708 Series - Page 33

EB 8546 EN 33
Measures for preparation
Type4708-62xxforType3372Actuator
1. Screw the special nut (5) into the SUPPLY
connecting hole of the actuator.
2. Slide the special hollow screw (6) into the
connection hole of the adapter plate.
3. Insert the O-ring (9). Position the supply
pressure regulator and fasten it to the
actuator using the special screw.
4. Seal the spare connections with stoppers
(4) to prevent dirt from entering the
device.
1
9
5
6
4
1
6
5
9
4
Fig.8: Mounting on Type3372 Actuator