Modifications in device firmware compared to the previous version
Previous version New version
A 2.03 / B 2.03 A 2.10 / B 2.10
Limit switches The limit switches A1 and A2 are configured over software as
minimum and maximum alarms.
They can be adjusted separately over the keys on the device.
Filling limit during oper-
ation
The filling limit during operation UCW can be set over the keys
on the device independently of the limit switches
A 2.10 / B 2.10 A 2.11 / B 2.11
Error code The current output of the Media 6 device is switched to
≥ 3.6 mA
4
EB 9527-1 EN
To Next Page
Loading...
