Auro D12/D15Owner's Manual 7
ENGLISH
Setting Up Your Auro System
This example shows a typical PA system using a powered mixer with a pair of Auro speak-
ers for the main left and right mix. A separate signal from the mixer’s AUX/MONITOR bus
is sent to an external power amplifier and two additional Auros placed in the tilt-back
(wedge) position used as floor monitors.
Vocal Vocal Electric Guitar Bass Guitar Keyboards
Signal Processor
Direct Box
MONITOR OUT connected to an
external monitor amp
AMP 2 OutputAMP 1 Output
To Next Page
Loading...
Need help?
General