Samson AURO D415 - Technical Specifications; Power and Transducer Details; Performance Characteristics; Crossover and EQ Settings

14
Auro D412/D415 Owners Manual
D412 D415
Output Power
Low Frequency
RMS Power 200 W @ 8 ohms
Peak Power 320 W @ 8 ohms
THD < 1 %
High Frequency
RMS Power 50 W @ 8 ohms
Peak Power 80 W @ 8 ohms
THD < 1 %
Transducers
Low Frequency 12” bass transducer, 2.5” voice coil 15” bass transducer, 3” voice coil
High Frequency 1.34” (34 mm) titanium compression driver, edge-wound copper voice coil
Acoustic Performance
Frequency Response (-3 dB) 58 Hz to 20 kHz 55 Hz to 20 kHz
Maximum Sound Pressure Level 125 dB SPL @ 1 124 dB SPL @ 1 m
Limiter Optical
Horizontal Coverage Angle 90°
Vertical Coverage Angle 60°
Electronic Crossover
Crossover Type 24 dB/oct Linkwitz-Riley
Crossover Frequency 2.1 kHz
Input/Output
Inputs Balanced XLR & 1/4” Mic/Line Connectors
Output Balanced XLR Line Output
Equalization
High ±15 dB @ 12 kHz, shelving
Low ±15 dB @ 80 Hz, shelving
Power Supply
Power Consumption 456 W max.
AC Connector 3-pin IEC 250 VAC, 20 A male
Fuse 100 - 115 VAC T5AL / 250 V
220 - 240 VAC T2.5AL / 250 V
Dimensions and Weight
Dimensions in 14” L x 10.8” W x 21.5” H 17.75” L x 13.5” W x 27.5” H
mm 356 mm L x 275 mm W x 546 mm H 450 mm L x 342 mm W x 698 mm H
Weight lbs 35.8 49
kg 16.25 22.25
Mounting
Mounting Method Integral 1 3/8” Pole Mount Receptacle
Fly Point 1
Specications
Specications are subject to change without notice.