Samson CONCERT 99 User Manual (English)

Questions and Answers:

J
Joshua BurtonJul 27, 2025
How to fix no audio on my Samson CONCERT 99?
- M
  Mr. James ShafferJul 27, 2025
  If you're experiencing a lack of audio with your Samson Microphone system, there are several things to check. First, ensure that both the transmitter and receiver are powered on. Next, verify that the transmitter's batteries are correctly installed and that the transmitter is not muted. Confirm that the CR99 receiver adapter is correctly connected and plugged into a working electrical outlet. Also, make sure the audio output cables are securely connected to the CR99 receiver. Ensure that the receiver and transmitter have a clear line of sight. Check the level controls on both the receiver and your audio input device. Finally, ensure that the transmitter and receiver are set to the same operating channel; if you're unsure, reset the channel by performing an IR set.
M
mwallerAug 2, 2025
What to do if my Samson CONCERT 99 Microphone system has audio dropout?
- W
  wbuckAug 2, 2025
  If you are experiencing audio dropouts with your Samson Microphone system, it could be due to a few reasons. The transmitter might be too far from the receiver; try moving it closer or repositioning the antennas. Also, remove any potential sources of RF interference, such as cell phones, cordless phones, lighting equipment, computers, or metal structures. Consider moving the receiver to the top of the equipment rack or placing it on top of other equipment to ensure a clear line of sight from the transmitter.
J
julielopezAug 8, 2025
Why is my Samson Microphone system audio distorted?
- D
  dramosAug 8, 2025
  If you're getting distorted audio from your Samson Microphone system, the receiver output level or the audio input device level may be too high. Also, check the transmitter's batteries and replace them if they are low. The input gain on the transmitter or audio source level may also be too high.
C
Carol PeckAug 14, 2025
What to do if Samson CONCERT 99 receiver will not power on?
- S
  salazarcraigAug 14, 2025
  If the receiver of your Samson Microphone system will not power on, check the adapter to ensure it is properly connected and plugged into an outlet providing power.
P
pmeyerAug 20, 2025
How to fix Samson Microphone system transmitter that will not power on?
- R
  rebecca72Aug 20, 2025
  If the transmitter of your Samson Microphone system will not power on, replace the transmitter batteries.

Samson CONCERT 99 Specifications

General

Wireless range	100 m
Microphone type	Lavalier microphone
Microphone frequency response	50 - 15000 Hz
Battery type	AA
Battery life (max)	8 h
Battery technology	Alkaline
Number of batteries supported	2
Manual	Yes
RF power	10 mW
Certification	CE, EN
Channels quantity	80 channels
Operating frequency type	Ultra High Frequency (UHF)
Radio Frequency (RF) range	606 - 630 MHz
6.35 mm (1⁄4-inch) output	1
Operating temperature (T-T)	-10 - 60 °C
Signal-to-Noise Ratio (SNR)	90 dB
Total Harmonic Distortion (THD)	1 %
Antenna type	Removable
Receiver type	Rack mount receiver
Receiver housing material	Metal
Operating voltage (receiver)	15 V
Power consumption (receiver) (max)	200 mA

Weight and Dimensions

Package depth	361 mm
Package width	293 mm
Package height	85 mm
Package weight	2000 g
Receiver weight	946 g
Transmitter weight	93 g
Receiver dimensions (WxDxH)	200 x 150 x 42 mm
Transmitter dimensions (WxDxH)	96 x 62 x 18.5 mm