EasyManua.ls Logo

Samson CONCERT 88X - User Manual

Samson CONCERT 88X
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER'S MANUAL
Frequency Agile Wireless System

Questions and Answers

  • E
    edward82Aug 17, 2025
    Why is there no audio from my Samson CONCERT 88X Microphone system?
    • A
      Amber SchmidtAug 17, 2025
      If you are experiencing no audio from your Samson Microphone system, several factors could be the cause. First, ensure that both the transmitter and receiver are powered on. Next, verify that the transmitter's batteries are correctly installed and that the transmitter is not muted. Confirm that the CR88x adapter is correctly connected and plugged into an electrical outlet, and that the CR88x receiver is turned on. Also, make sure the CR88x audio output connections are securely connected. Ensure that the receiver and transmitter are in line of sight with one another. Check the receiver and audio input device level controls. Finally, ensure that the transmitter and receiver are set to the same operating channel; if unsure, reset the channel.
  • L
    Lisa PopeAug 20, 2025
    What to do if my Samson CONCERT 88X Microphone system has audio dropout?
    • D
      Danny JonesAug 20, 2025
      If you're experiencing audio dropouts with your Samson Microphone system, it could be due to the transmitter being too far from the receiver. Try moving the transmitter closer to the receiver or repositioning the antennas. Also, try removing any sources of RF interference, such as cell phones, cordless phones, lighting equipment, computers, or metal structures.
  • T
    tmitchellAug 22, 2025
    How to fix distorted audio on Samson CONCERT 88X Microphone system?
    • M
      Melvin LindseyAug 23, 2025
      If you're getting distorted audio from your Samson Microphone system, the receiver output level or audio input device level may be too high. Also, check the transmitter's batteries and replace them if they are low. The input gain on the transmitter (CH88 or CB88) or audio source level may also be too high.
  • M
    Matthew SalazarAug 25, 2025
    Why won't my Samson CONCERT 88X Microphone system receiver power on?
    • J
      Joseph MarshallAug 26, 2025
      If the receiver of your Samson Microphone system won't power on, check the adapter to ensure it is properly connected and plugged into an outlet providing power.
  • P
    Patrick FrenchAug 27, 2025
    Why won't my Samson CONCERT 88X Microphone system transmitter power on and the LED light is red?
    • C
      Christine BrooksAug 28, 2025
      If the transmitter of your Samson Microphone system will not power on and the LED light is red, replace the transmitter batteries.
  • R
    russellgarzaAug 31, 2025
    How to eliminate unwanted noise or interference from my Samson CONCERT 88X Microphone system?
    • J
      John BushAug 31, 2025
      To eliminate unwanted noise or interference from your Samson Microphone system, if using multiple systems, make sure none of them are operating on the same channel. If the problem persists, change one or all of the systems' channels.
  • A
    Andrew WilliamsSep 2, 2025
    How to fix no audio on Samson CONCERT 88X?
    • M
      moodymarcSep 3, 2025
      If your Samson Microphone system has no audio, first ensure both the transmitter and receiver are powered on. Check the transmitter's batteries are correctly installed and that the transmitter is not muted. Confirm the CR88x adapter is correctly connected to an outlet and that the CR88x receiver is turned on. Also, verify the CR88x audio output connections are secure. Ensure the receiver and transmitter have a clear line of sight. Check the receiver and audio input device level controls. Finally, make sure the transmitter and receiver are set to the same operating channel, resetting if necessary.
  • K
    Karen LangSep 5, 2025
    Why is my Samson Microphone system audio distorted?
    • X
      xrussellSep 5, 2025
      If you are experiencing distorted audio with your Samson Microphone system, the receiver output level or audio input device level may be too high. Check the transmitter's batteries and replace them if they are low. Also, the input gain on the transmitter (CH88 or CB88) or audio source level may be too high.
  • A
    Aaron RuizSep 8, 2025
    What to do if Samson CONCERT 88X has audio dropout?
    • J
      Jessica ScottSep 8, 2025
      If you're experiencing audio dropouts with your Samson Microphone system, the transmitter may be too far from the receiver. Try moving it closer or repositioning the antennas. Also, remove any potential sources of RF interference such as cell phones, cordless phones, lighting equipment, computers, or metal structures.
  • J
    Jessica WilliamsSep 12, 2025
    Why Samson Microphone system receiver will not power on?
    • D
      Dennis KnightSep 12, 2025
      If the receiver of your Samson Microphone system will not power on, check the adapter to ensure it is properly connected and plugged into an outlet providing power.

Summary

Important Safety Information

Introduction

CR88 x Receiver Front Panel

Receiver Controls and Indicators

Details receiver volume, status, peak indicators, and channel display.

Receiver Functions and Antennas

Explains IR, SCAN, POWER functions and antenna placement for setup.

CR88 x Receiver Rear Panel

Rear Panel Connections and Power

Details DC input, balanced XLR, and unbalanced 1/4" output connections.

CB88 Beltpack Transmitter Features

Transmitter Input and Operation

Covers input connection, status LED, and power/mute functions for the transmitter.

Transmitter Physical Features

Details the belt clip, battery access, and antenna for the transmitter.

CH88 Handheld Transmitter Features

Handheld Transmitter Input and Operation

Covers input connection, status LED, and power/mute functions for the transmitter.

Handheld Transmitter Physical Features

Details the battery compartment, gain control, and IR lens for the transmitter.

Quick Start - Single System Setup

Multiple System Setup

Rack Mounting Guide

Troubleshooting Guide

System Specifications

System General Specifications

Details general system specifications like range, frequency response, and operating temperature.

Transmitter Specifications

Lists specifications for the CB88 beltpack and CH88 handheld transmitters.

Receiver Specifications

Details specifications for the CR88x receiver, including output levels and dimensions.

Operating Bands and Frequency Ranges

Samson CONCERT 88X Specifications

General IconGeneral
Transmitter Power10mW
ModulationFM
Frequency Response50Hz-15kHz
ColorBlack
System TypeWireless
TypeWireless
Operating Range100m
Microphone TypeDynamic
Polar PatternCardioid
Battery Life8 hours
Receiver OutputsXLR, 1/4"
Dynamic Range100dB
ConnectorXLR

Related product manuals