What to do if Samson CONCERT 88X Microphone system transmitter will not power on (LED lights RED)?
If the transmitter of your Samson Microphone system will not power on and the LED lights are red, replace the transmitter batteries.
General| Transmitter Power | 10mW |
|---|---|
| Modulation | FM |
| Frequency Response | 50Hz-15kHz |
| Color | Black |
| System Type | Wireless |
| Type | Wireless |
| Operating Range | 100m |
| Microphone Type | Dynamic |
| Polar Pattern | Cardioid |
| Battery Life | 8 hours |
| Receiver Outputs | XLR, 1/4" |
| Dynamic Range | 100dB |
| Connector | XLR |
Details receiver volume, status, peak indicators, and channel display.
Explains IR, SCAN, POWER functions and antenna placement for setup.
Details DC input, balanced XLR, and unbalanced 1/4" output connections.
Covers input connection, status LED, and power/mute functions for the transmitter.
Details the belt clip, battery access, and antenna for the transmitter.
Covers input connection, status LED, and power/mute functions for the transmitter.
Details the battery compartment, gain control, and IR lens for the transmitter.
Details general system specifications like range, frequency response, and operating temperature.
Lists specifications for the CB88 beltpack and CH88 handheld transmitters.
Details specifications for the CR88x receiver, including output levels and dimensions.
To Next Page
