When you use the D1500 RTA and the D2500 digital EQ
together they combine to create a powerful automatic
equalization system. You simply connect the two units
using D-Net or MIDI, and then the D1500’s AUTO EQ
feature to let the onboard DSP’s measure your system
response and adjust the equalizer for a flat response, or
for any EQ response curve that you may have saved in
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES
CLASS B
. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MUST NOT CAUSE HARMFUL
INTERFERENCE
, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED INCLUDING INTERFERENCE THAT
MAY C
AUSE UNDESIRED OPERATION.
�
The diagram above shows a typical set up for using a D1500 RTA with a D2500 digital equalizer to auto-equalize the loud-
To Next Page
Loading...