Samson D-2500 - Specifications

28
Specifications
Inputs
Type electronically balanced
Connector XLR
Impedance 22 kΩ at 1 kHz
Max. input level +22
AIO1: +14dBu
AIO2: +20dBu
Outputs
Type electronically balanced
Connector XLR
Impedance 100 Ohms at 1 kHz
Max. output level
AIO1: +14dBu
AIO2: +20dBu
Frequency Response
10 Hz to 35 kHz (-1dB)
@ 96 kHz sampling rate
Signal-to-noise-ratio
AIO1:
Noise floor (unweighted) < -92 dBFS (-78 dBU)
Noise floor (A-weighted) < -100 dBFS (-86 dBU)
AIO2:
Noise floor (unweighted) < -106 dBFS (-86 dBU)
Noise floor (A-weighted) < -112 dBFS (-92 dBU)
THD
0.005 % typ. @ +4 dBu, 1 kHz,
unity gain
Digital Processing
Converter 24-bit Delta-Sigma,
64/128-oversampling
Sample rate
AIO1 & AIO2 32, 44.1, 48, 64, 88.2, 96 kHz
DIO1 96 kHz
Type digital 31-band equalizer
DIO1 96 kHzType digital 31-band equalizer DIO1 96 kHz
Frequency range 20 Hz to 20 kHz, 31 bands on ISO standard frequencies
Display
Type Custom LCD for parameter control
Memory
Presets
100 memory locations, 99 user programable
Midi interface
Type 5-pin. DIN jacks In/Out/Thru
Power supply
Mains voltage 115 V, 60 Hz, 230 V, 50 Hz
Power consumption 20 W typ.
Fuse T 630mA for 100- 120 Volt / T315mA for 220 - 240 Volt
Mains connector Standard IEC receptacle
Dimensions
19 in. (w) x 10.5 (d) x 3.5 (h)
482 mm (w) x 267 (d) x 89 (h)
Weight
5.1 lb.(2.31 kg)