Need help?Do you have a question about the Samson D3500 and is the answer not in the manual?
General| Brand | Samson |
|---|---|
| Model | D3500 |
| Category | Stereo Equalizer |
| Language | English |
Key safety guidelines for operating the unit safely, covering electrical shock and fire hazards.
Detailed description and numbering of the D3500's front panel controls and indicators.
Explanation of the various input, output, and communication ports on the rear panel of the D3500.
Familiarization with front panel controls and parameter adjustments for the D3500.
Guide on how to choose audio input options for the D3500 unit.
How to assign hardware controls to left/right channels and link them for operation.
Instructions for linking left and right channels for simultaneous control adjustments.
A step-by-step guide to using the D3500 for automatic feedback reduction.
Detailed procedure for using the LEARN mode for automatic feedback setup.
How to use the front panel knobs for real-time EQ adjustments.
Step-by-step guide for using the LEARN mode to set up feedback filters.
Instructions for setting up DYNAMIC mode filters for feedback management.
Overview of various digital processing effects and their controls.
Adjusting parameters like Sensitivity, Hold, and Release for feedback filters.
How to manually set EQ parameters like Frequency, Bandwidth, and Gain.
How to use the noise gate to eliminate system hums and buzzes.
How to use the digital delay for speaker time alignment.
How to use the enhancer for sweetening high frequencies or reducing noise.
Using High-Pass and Low-Pass filters to shape the EQ curve.
How to use the digital limiter to protect speaker systems from overloads.
How to save equalization curves and effect parameters as presets.
How to load saved presets into the D3500 memory.
Merging saved parameters from different presets while masking others.
Comparing current edits with saved presets.
Information on system control via MIDI and Samson's D-Net protocol.
Enabling the D3500 to send and receive MIDI data.
Configuring the D3500 for high-speed data communication via D-Net.
Programming the D3500 to receive MIDI messages on specific channels.
Setting the D3500 to receive MIDI messages in Omni mode.
Configuring the D3500 for System Exclusive MIDI messages.
Programming the D3500 for MIDI Program Change operations.
Diagram and explanation for connecting to active loudspeakers.
Diagram and explanation for connecting to passive loudspeakers via a power amp.
How to use the D3500 to equalize individual mono channels in a mixer.
Configuration for main PA and monitor mixes using the D3500.
Example setup using two D3500 units for stereo mains and monitor mixes.
To Next Page
