Samson D3500 - Specifications

24
Specifications
inputs
Type electronically balanced
Connector XLR
Impedance 22 kΩ at 1 kHz
Max. input level +22 dBu
AIO1: 0 dBFS = +14dBu (Max level)
AIO2: 0 dBFS = +20dBu (Max level)
Outputs
Type electronically balanced
Connector XLR
Impedance 100 Ohms at 1 kHz
Max. output level +22 dBu,
System Specifications
Frequency Response 10 Hz to 35 kHz (-1dB)
@ 96 kHz sampling rate
Signal-to-noise-ratio
AIO1:
Noise floor (unweighted) < -92 dBFS (-78 dBU)
Noise floor (A-weighted) < -100 dBFS (-86 dBU)
AIO2:
Noise floor (unweighted) < -106 dBFS (-86 dBU)
Noise floor (A-weighted) < -112 dBFS (-92 dBU)
THD 0.007 % typ. @ +4 dBu, 1 kHz,
unity gain
Digital processing
Converter
24-bit Delta-Sigma,
64/128-oversampling
Sample rate
44.1, 48, 88.2, 96 kHz
Display
Custom, Backlit LCD for parameter control
Memory Presets
100 memory locations, 99 user programable
Communications
Midi In/Out/Thru on 5-pin. DIN jacks
D net Single XLR In and Out
Power supply
Mains voltage 115 V, 60 Hz, 230 V, 50 Hz
Power consumption 20 W typ.
Fuse T 1 A H
Mains connector Standard IEC receptacle
Dimensions (HxWxD)
19 in. (w) x 10.5 (d) x 3.5 (h)
482 mm (w) x 267 (d) x 89 (h)
Weight
5.1 lb.(2.31 kg)
All specifications are subject to change without notice.
D3500_ownman_v1_2.indd 24 9/4/05 5:21:37 PM