Samson D-2500 - System Configurations; Two D2500 s for Mains and Monitors

24
System Configurations
Using the D2500 with Active Speakers
In this example, the mixer’s stereo output is connected to the D2500’s inputs. Then, the D2500’s outputs are connected to the inputs of each
active (self-powered) loudspeaker.
Using the D2500 with Passive Speakers
In this example the mixer’s stereo output is connected to the D2500’s inputs. Then, the D2500’s outputs are connected to the input of a 2-
channel power amp. Next, the power amplifier’s outputs are connected to the passive (non-powered) loudspeakers.