12
The XP108w has an internal, rechargeable battery capable of up to 20 hours of continuous
audio on a full charge. Even though the system may have some charge when first taken out
of the box, we recommend fully charging your XP108w before first using the system. To
charge the battery:
1. Connect the XP108w to an AC power outlet using the
included power cable.
2. Set the power switch to the “RECHARGE” position.
3. While charging the CHARGING indicator will light red.
4. Keep the system plugged in until the CHARGING
indicator changes to green, indicating the battery is fully
charged.
The XP108w utilizes a sealed lead-acid gel cell battery. When
not in use, the battery will slowly self-discharge. If you are
planning not to use the XP108w for a long period of time,
it is advised to fully charge the unit before storing. It is also
important to charge the unit every six months when not used.
This will ensure a healthy battery and extend its life. If the
battery is left with a very low charge for an extended period
of time, it is possible to recharge the battery to working
condition, but the charge time can take up to 72 hours.
If you find that the operation time of the XP108w becomes
noticeably decreased, even after fully charging, the battery
should be replaced. Contact Samson customer service or your
local distributor for a replacement battery.
Charging the Battery
To Next Page
Loading...
