XP310w • Portable PA System 15
ENGLISH
FRANÇAISDEUTSCHEESPAÑOLITALIANO
The XP310w LINE OUT jack allows you to connect the XP310w with any powered speaker to
expand your system or link two XP310w systems together to daisy chain the speakers.
Using a standard shielded 1/4” instrument cable, connect the LINE OUT on the XP310w to
a line level input of a second powered speaker. The XP310w will send a mix of all inputs,
including Bluetooth® audio. Each channel VOLUME will control corresponding output level
to the LINE OUT jack.
Using the LINE OUT Jack
Using a Speaker Stand
The XP310w includes a 1 3/8” (35mm) pole mount
receptacle on the bottom of the cabinet. This fits
a standard 1-3/8” (35mm) speaker stand. For
maximum coverage when using a speaker stand,
the speaker should be raised above the heads of the
listening audience.
Take care when placing the speaker on a stand,
to ensure that it is on a level, steady surface and
will not tip over. Use a stand designed to support a
speaker with a minimum weight of 30lb.
To Next Page
Loading...
