8
XP310w Rear Panel Callouts
1
7
2
3
5
4
6
1. Power / Recharge Switch - This
three position switch is used to turn
the XP310w ON, OFF or place the
system into RECHARGE mode to
charge the internal battery.
2. AC INPUT - Connect the supplied
power cord here.
3. CR88a Receiver - Included
frequency agile wireless UHF
receiver.
4. CR88a receiver cover/slot - Extra
slot to add an additional CR88a
wireless receiver.
5. Microphone storage - Two slots
to store wireless handheld
transmitters.
6. Telescopic handle - Press button
and pull up to extend the telescopic
handle.
7. Speaker stand receptacle - 1 3/8”
locking stand mount for placing
the XP310w on a standard speaker
stand.
To Next Page
Loading...
