Samson MDR10 - User Manual

MDR Series Mixers
TEN CHANNEL MIXER
WITH 24BIT DIGITAL EFFECTS
MDR10

Summary

Safety Instructions

General Safety Warnings

Crucial warnings about fire, electric shock, and proper usage, including 'WARNING' and 'CAUTION' notices.

Important Safety Instructions

Key guidelines for safe operation, maintenance, and handling of the equipment.

Front Panel Layout

Rear Panel Layout

Controls and Functions

Mono Input Channel Gain, EQ, and Low Cut

Explains GAIN, CLIP LED, 3-band EQ (HF, Mid, LF), and LOW CUT FILTER for mono input channels.

Mono Input Channel Sends and Pan

Details AUX 1 SEND, AUX 1 PRE/POST switch, AUX 2/DSP Send, and PAN control for mono channels.

Stereo;Dual Mono Input Channel EQ, Sends, and Solo

Details the 2-band EQ, AUX 1/2 Switch, AUX Control Knob, PAN, and SOLO for stereo/dual mono channels.

Master Section: FX Returns and SOLO;PFL

Explains FX TO AUX 1, FX RETURN 1/2, and SOLO switches for FX returns and master section.

Master Output Section Controls

Details SOLO LEVEL, 3/4 to MIX switch, C/ROOM+PHONES, MIX/2TK, and output faders.

MDR10 Input and Output Connections

Operating the MDR10

Basic Operation and Setup

Guides through connecting microphones/instruments, setting input gain, and powering up the system.

MDR10 System Set-Ups

MDR10 Live Sound Setup Example

Illustrates a typical live sound setup connecting microphones, instruments, and powered speakers.

MDR10 Recording Setup Example

MDR10 Specifications

MDR10 Block Diagram

Samson MDR10 Specifications