Samson Mixpad MXP124 - Specifications

19
Frequency Response (Trim @ Min, unity gain ± 3 dB)
Mic to Main 20Hz~30KHz
Line to Main 20Hz~30KHz
Aux Return to Main 20Hz~30KHz
Line to Aux Send 20Hz~30KHz
T.H.D. (Trim @ Min, +4dBu output, unity gain, 1 kHz w/30 kHz LPF)
Mic/Line to Main (Mono Ch) <0.03%
Line to Main (Stereo Ch) <0.03%
Line to Aux Send <0.03%
Equivalent Input Noise (“A” filter on, input shorted)
Mic (Trim @ Min, Fader set ”0”) < -90dB 20HZ~30KHZ A-weighted
Line (Trim @ Min, Fader set ”0”) < -90dB 20HZ~30KHZ A-weighted
Maximum Voltage Gain
Mic to Main 63dB
Line to Main (Mono Ch) 39dB
Line/Tape to Main (Stereo Ch) 26dB
Mic to Aux Send 63dB
Line to Aux Send (Stereo Ch) 29dB
Residual Noise (30 kHz LPF, all control Min)
Main (All fader min) -105dBu A-weighted
Aux Send (All fader min) -94dBu A-weighted
Crosstalk (@ 1 kHz w/ 30 kHz LPF)
Ch vs. Ch ( Trim @ min,Fader set 0) >75dB A-weighted
Input vs. Output >60dB A-weighted
PEAK Indicators
Mic (Mono Ch) +16dBu
Line (Stereo Ch) +16dBu
Headphone output (600 ohm load) +20dBu
Maximum Input Level (1 kHz, ± 3dB)
Mic Input (Mono Ch) +16dBu
Line Input (Mono Ch) +40dBu
Input Channel Equalizer (± 3dB)
High ±15 dBu
Mid ±15 dBu
Low ±15 dBu
Specifications