36
MIXPAD 12 / 9 Specifications
Normal Limit
Frequency Response (Trim @ Min, unity gain ± 3 dB)
Mic to Main 5 Hz - 65 kHz 10 Hz - 50 kHz
Line to Main 5 Hz - 65 kHz
Aux Return to Main 5 Hz - 75 kHz
Line to Aux Send 1/2 5 Hz - 75 kHz
T.H.D. (Trim @ Min, +4dBu output, unity gain, 1 kHz w/30 Hz LPF)
Mic/Line to Main (Mono Ch) 0.002% 0.01%
Line to Main (Stereo Ch) 0.002% 0.01%
Line to Aux Send 0.002% 0.01%
Equivalent Input Noise (“A” filter on, input shorted)
Mic -128 dB -128 dB
Line -111 dB -111 dB
Maximum Voltage Gain
Mic to Main 74 dB
Line to Main (Mono Ch) 54 dB
Line/Tape to Main (Stereo Ch) 34 dB
Aux Return to Main 20 dB
Mic to Aux Send 1 (Mono Ch) 64 dB
Mic to Aux Send 2 (Mono Ch) 74 dB
Line to Aux Send 1 (Stereo Ch) 24 dB
Line to Aux Send 2 (Stereo Ch) 34 dB
Residual Noise (30 kHz LPF, all control Min)
L/R Main 100 dB 95 dB
Aux Send 1/2 92 dB/91 dB 85 dB
Crosstalk (@ 1 kHz w/ 30 kHz LPF)
Ch vs. Ch 77 dB 70 dB
Input vs. Output 82 dB 75 dB
Peak LED Sensitivity (before clipping) 3 dB 3 ± 2dB
Headphone output (600 ohm load) 112 mW 100 mW
Maximum Input Level (1 kHz, ± 3dB)
Mic Input (Mono Ch) +22 dBu
Line Input (Stereo Ch) +7 dBu
Input Channel Equalizer (± 2dB)
High (shelving) 10 kHz ±15 dB
Low (shelving) 100 Hz ±15 dB
Dimensions (W x D x H) MIXPAD 9: 239 x 228 x 58 mm
(9.4 x 9 x 2.3 in.)
MIXPAD 12: 324 x 228 x 58 mm
(12.75 x 9 x 2.3 in.)
To Next Page
Loading...
Need help?
General
