Samson STUDIOGT - Samson Studio GT Specifications

Studio GT Owner’s Manual 16
STUDIO GT SPECIFICATIONS
Transducers
Woofer . . . . . . . . . . . . . . 4” polypropylene with santoprene surround,
Tweeter. . . . . . . . . . . . . . 1-inch silkdome ferro uid neodymium tweeter
Frequency response. . . . . . 65Hz - 22kHz
Amplier Power . . . . . . . . 2 x 18 Watts RMS
Crossover Frequency . . . . . HPF: 4kHz, 6 dB/oct Butterworth;
LPF: 1400Hz, 12 dB/oct Linkwitz-Riley
Inputs
MIC Input
Connector . . . . . . . . . . . . XLR (1: GND, 2: HOT, 3: COLD)
Input impedance. . . . . . . . 1.4 k
Input level . . . . . . . . . . . . -40 dBu (Trim max) to -5 dBu (Any gain)
Equivalent Noise Level . . . . -120 dBu (A-weighted)
Phantom Power . . . . . . . . +48V
LINE/INSTRUMENT Input
Connector . . . . . . . . . . . . ¼” Phone jack unbalanced (Tip: HOT, Sleeve: GND)
Input impedance. . . . . . . . 1 M
Input level . . . . . . . . . . . . -14 dBu (Trim max) to +20 dBu (Any gain)
Aux Input Connectors . . . . RCA, 3.5mm
Headphone Outputs
Connector . . . . . . . . . . . . ⁄” Phone jack (Tip: L, Ring: R, Sleeve: GND)
Output Power. . . . . . . . . . 50 mW at 32 1% THD+N
USB Audio
USB . . . . . . . . . . . . . . . . USB 2.0 connection
USB audio . . . . . . . . . . . . Full speed
Connector . . . . . . . . . . . . B type
ADC and DAC (Internal) . . . 16 bit delta sigma, 44.1kHz or 48kHz
Input dynamic range . . . . . 93 dB (A-weighted)
Output dynamic range . . . . >90 dB (A-weighted)
Enclosure
Construction . . . . . . . . . . MDF
Finish . . . . . . . . . . . . . . . Black textured vinyl covering
Dimensions . . . . . . . . . . . 6.625” W x 7.625” D x 9.125” H
168mm W x 194mm D x 232mm H
Weight
Active. . . . . . . . . . . . . . .9.5 lbs / 4.3 kg
Passive . . . . . . . . . . . . . .6.5 lbs / 3 kg
Specications are subject to change without notice.