Name: Samson XP150
Brand: Samson
Rating: 5 (1 reviews)

To Next Page

To Previous Page

ENGLISHFRANÇAISDEUTSCHEESPAÑOLITALIANO

XP150 Quick Start

1. Be sure that the XP150’s POWER switch is set to the OFF position.

2. If the speakers are not connected, connect the speaker wires as described in the

previous section.

3. Turn each of the channel volume (VOL) and MASTER volume controls fully coun-

terclockwise, to the “0” position.

4. Next, connect one side of the included power cable to the XP150 mixer’s power

inlet and the other to a grounded AC power outlet.

5. Connect your microphones using standard XLR cables, instruments using ¼”

phone cables, and MP3 player using 3.5mm cable, into the appropriate jacks on

the mixer.

Microphone

Electric Acoustic

Guitar

Keyboard

6. Switch on all equipment connected to the XP150, then switch the XP150’s POWER

switch to the ON position.

7. Turn the MASTER level control up halfway, to the “5” position.

Owner's Manual

Expedition XP150

Questions and Answers:

Need help?

Do you have a question about the Samson XP150 and is the answer not in the manual?

Samson XP150 Specifications

General