Samson XP308i - Xp308 I Speaker Layout; Xp308 I Front View Layout

3
XP308i Speaker Layout
XP308i Front View Layout
A
B
D
C
E
F
G
A. Wide Dispersion Horn – 1 inch throat, 60
x 90 degree wide dispersion horn provides
extensive coverage and linear off- axis
response.
B. Titanium Tweeter Driver – 135 inch
(34mm), titanium diaphragm with 1 inch
opening.
C. Handle
– One of two ultra over sized
rubber grip carry handles.
D. Enclosure – Thick-wall, rugged PVC plastic
enclosure.
E. 8-inch Driver – Custom designed, high
sensitivity,heavy-duty, 8” low frequency
driver provides deep bass.
F. Steel Grill – Durable steel grill provides
protection for, and easy access to LF driver.
G. Bass Port– Two precision tuned, low
frequency port tubes extend the bass
response.
H. Powered Mixer – The XP308i’s eight-chan-
nel, 300 watt powered mixer fits conve-
niently inside the one speaker enclosure.
I. Quarter Turn Screw – The mixer and
accessory compartment panel are easily
opened and closed using the built-in quar-
ter turn screws.
J. Accessory Compartment
– You can store
your speaker cables or microphones inside
one speaker enclosure by removing the
accessory door using the quarter turn
screws.
K. INPUT - 1/4-inch phone jack – Each speak-
er enclosure has an input on a 1/4-inch
phone jack.
L. Pole Mount – The XP308i has integral 1 3/8
(35mm) speaker stand receptacle allow-
ing the speakers to be set on standard
speaker stands with no additional adapters
required.
H
I I
J
LL
KK
XP308i Rear View Layout