To Next PageTo Next PageWhy is my Samsung 4 Series LCD TV picture blurred?
If your Samsung LCD TV picture is blurred or snowy, and the sound is distorted, check the direction, location, and connections of your aerial. This type of interference is often due to the use of an indoor aerial.
How to fix a Samsung LED TV that won't turn on?
If your Samsung LED TV won't turn on, ensure the AC power cord is securely plugged into both the wall outlet and the TV. Verify that the wall outlet is functioning correctly. You can also try pressing the 'P' button on the TV itself to rule out any remote control issues.
Why is there no picture on my Samsung LED TV?
If there is no picture on your Samsung LED TV, check the cable connections by removing and reconnecting all cables connected to the TV and any external devices. Ensure your external device’s video outputs match the connections to the TV input. Also, make sure all connected devices are powered on and that you've selected the correct source on your TV using the SOURCE button on the remote. Try rebooting the connected device by disconnecting and reconnecting its power cable.
Why does my Samsung 4 Series LCD TV say ‘Resets all settings to the default values’?
If the ‘Resets all settings to the default values’ message appears on your Samsung LCD TV, this occurs when you press and hold the EXIT button for an extended period.
Why is there a damaged picture in the corner of my Samsung 4 Series LCD TV?
If a damaged picture appears in the corner of the screen of your Samsung LCD TV, and you are using external devices, it might be because Screen Fit is selected on those devices. This symptom is caused by external devices, not the TV itself.
Why are there small particles on the edge of the bezel of my Samsung 4 Series?
These small particles are part of the product’s design and are not a defect.
What does 'Not Supported Mode' mean on Samsung LCD TV?
If your Samsung LCD TV displays an ‘Not Supported Mode’ message in PC mode, check the maximum resolution and the frequency of the video adaptor connected to the TV. Compare these values with the data in the Display Modes section of the manual.
What to do if Samsung 4 Series remote control malfunctions?
If your Samsung LCD TV remote control malfunctions, try replacing the remote control batteries. Clean the upper edge of the remote control, specifically the transmission window. Also, check the battery terminals to ensure they are properly aligned and free of corrosion.
Why does my Samsung LCD TV say 'Check signal cable'?
If your Samsung LCD TV displays a ‘Check signal cable’ message, ensure that the signal cable is firmly connected to both the PC or video source and the TV. Also, verify that the PC or video source is powered on.
What to do if there is a dotted line on the edge of my Samsung Plasma TV screen?
If you notice a dotted line on the edge of your Samsung Plasma TV screen: * If the picture size is set to Screen Fit, change it to 16:9. * Change cable/satellite box resolution.
General| Refresh Rate | 60Hz |
|---|---|
| Ethernet | Yes |
| Digital Audio Output | 1 (Optical) |
| Dimensions (Without Stand) | Varies by screen size |
| Weight (Without Stand) | Varies by screen size |
| Screen Sizes | 43", 50", 55", 65" |
| Smart TV | Yes |
| USB Ports | 1 |
| Wi-Fi | Yes |
| Speaker Output | 20W |
Describes the television's key features and capabilities.
Lists the items included with the LCD TV package.
Details the buttons located on the TV's control panel.
Illustrates and labels the TV's rear and side connection ports.
Guide for connecting TV antennas to the ANT IN terminal.
Instructions for connecting to a cable TV system.
Connects HDMI devices to the TV's HDMI IN ports.
Connects DVI output devices to the TV's HDMI IN ports.
Connects component video and audio devices to the TV.
Connects camcorders to the TV's side AV IN jacks.
Connects VCRs via video or S-Video cables.
Connects digital audio systems or home theater receivers.
Connects audio amplifiers and home theater systems.
Connects computers to the TV via D-Sub or HDMI/DVI cables.
Basic instructions for powering the TV on and off.
Guides the initial setup process for the TV.
Methods for switching between TV channels.
Controls for increasing or decreasing the TV's sound level.
Accesses frequently used functions quickly via the remote.
Selects picture modes like Dynamic, Standard, or Movie.
Adjusts basic picture parameters like brightness and contrast.
Fine-tunes advanced picture parameters for optimal quality.
Adjusts the image aspect ratio for different video inputs.
Selects optimal sound modes for different types of content.
Adjusts sound equalizer settings for personal preference.
Enables virtual surround sound experience with two speakers.
Filters out scrambled digital channels after auto program.
Manages channel lists by adding or deleting channels.
Marks frequently watched channels for quick access.
Adjusts analog channel reception for optimal clarity.
Connects the TV to a computer to use it as a monitor.
Optimizes the picture quality when connecting a PC.
Adjusts the PC image position on the TV screen.
Manually sets the TV's internal clock for timer features.
Sets a timer to automatically turn off the TV.
Sets the language for the TV's on-screen menus.
Manages parental control restrictions based on TV ratings.
Displays on-screen text captions for analog TV signals.
Displays on-screen text captions for digital TV signals.
Explains the Anynet+ feature for controlling Samsung devices.
Details how to connect Anynet+ compatible devices.
Configures Anynet+ functions like Auto Turn Off.
Instructions for recording TV programs using a connected device.
Lists common problems and their solutions for the TV.
Step-by-step guide for attaching the TV stand.
Details VESA compatibility for wall mounting.
Physical dimensions for the 26-inch LCD TV model.
Physical dimensions for the 32-inch LCD TV model.
Physical dimensions for the 37-inch LCD TV model.
Physical dimensions for the 40-inch LCD TV model.
