106 107
Using the Channel Settings
Broadcasting Channel Settings
Manual Tuning
Broadcasting Channel Settings Manual Tuning
Scans for a channel manually and stores in the TV.
If a channel is locked using the Channel Lock function, the PIN input window appears.
This function depends on the country and region.
When Aerial Source is set to Terrestrial or Cable
●
Digital Channel Tuning
Scans for a digital channel.
1.
Select the New.
"
When selecting Aerial → Terrestrial: Channel, Frequency, Bandwidth
"
When selecting Aerial → Cable: Frequency, Modulation, Symbol Rate
●
Availability depends on the specific model and area.
2.
Select the Search. When scanning has finished, a channel is updated in the channel list.
●
Analogue Channel Tuning
Scans for an analogue channel.
1.
Select the New.
2.
Set the Programme, Colour System, Sound System, Channel and Search.
3.
Select the Store. When scanning has finished, a channel is updated in the channel list.
Channel mode
●
P (programme mode)
When tuning is complete, the broadcasting stations in your area have been assigned to position
numbers from P0 to P99. You can select a channel by entering the position number in this mode.
●
C (aerial channel mode) / S or Z (cable channel mode)
These two modes allow you to select a channel by entering the assigned number for each aerial
broadcasting station or cable channel.
To Next Page
Loading...
