126
Setting the Time and Using the Timer
Setting the Current Time
System Time Clock
Try Now
Set the clock manually or automatically. Once the clock has been set, you can press the INFO button
on the standard remote or press the MENU/123 button on the smart control, then select the INFO to
check the current time.
"
The clock must be reset every time the power is disconnected.
Setting the Clock using Digital Broadcast Info
System Time Clock Clock Mode
Try Now
Set Clock Mode to Auto. The TV automatically downloads the correct time from a digital channel.
To enable this option, the TV's Antenna jack must be connected to either an antenna or a cable
output and must be receiving digital broadcasts. The accuracy of the time information received may
vary depending on the channel and signal. If your TV is connected to a set-top-box using HDMI or
Component connections, you must set the time manually.
If the Clock is Wrong in Auto Mode
System Time Clock Clock Mode Time Offset
Try Now
If the time set automatically is incorrect, you can offset the clock in 1-hour increments by as much as
-/+ 12 hours. Select System Time Clock Clock Mode Time Offset and offset the clock to the
correct time.
"
Time Offset adjusts the time through network connections and is only available if the Clock is set to Auto
and the TV is connected to the Internet though a local area network.
"
Time Offset will adjust the time if the TV fails to receive time information through normal digital broadcast
signals.
Setting the Clock Manually
System Time Clock Clock Set
Try Now
Manually enter the time. Set Clock Mode to Manual and then select Clock Set to enter the current
time and date.
Clock Set: Set the current Date and Time.
System and Support
You can use the functions for optimizing, protecting, and updating your TV and for various minor useful or required options. Customize various
system and support settings for optimal use.
To Next Page
Loading...
