Samsung 6 series - Input Signal Selection

34 35
Input Signal Selection
You can select a connected external device using the SOURCE button.
"
Connector names may vary depending on the model.
The following options are available in the Source List screen:
●
Options
Select a port connected to an external device, and press and hold Enter button or press the
button. The following functions are available:
"
Available options for each connector may vary.
–
Edit Name: Rename devices connected to the TV for easier identification of external sources.
For example, you can designate a computer connected to the TV via an HDMI-DVI cable as
DVI PC. Alternatively, simply designate a computer connected to the TV via an HDMI cable as
PC. You can also designate an AV device connected to the TV via an HDMI-DVI cable as DVI
Devices.
–
Information: View detailed information about the connected devices.
–
Anynet+ (HDMI-CEC): Displays a list of Anynet+ (HDMI-CEC)-compliant devices that are
connected to the TV.
"
This option is only available with Anynet+ (HDMI-CEC) set to On.
–
Format Device: Formats USB recording devices connected to the TV.
"
This option is only available when a USB device has been selected.
–
Remove USB Device: Used to safely remove a USB device connected to the TV.
"
This option is only available when a USB device has been selected.
–
Edit Device Type: Changes the types of the external devices. Select an external device to
change.
–
Remove Source Thumbnail: Deletes an external device from a source.
●
Universal remote setup
Select Universal remote setup on the screen to configure the universal remote function. By
configuring a universal remote control, you can control cable boxes, Blu-ray players, home
theatres, and other external devices using a single remote control.
"
Availability depends on the specific model and area.