Samsung 6 series - Page 137

130 131
Using Anynet+ (HDMI-CEC)
Selecting an External Device
"
Availability depends on the specific model and area.
1.
Connect the device to the TV, and then press the SOURCE button to display the Source screen.
Press the MENU/123 button on the Samsung Smart Control, then select SOURCE on the On
Screen Remote.
2.
Select Anynet+ (HDMI-CEC) from the list. The Select Device screen appears.
3.
Select a device and wait for the switch to take place. This process may take up to 2 minutes to
complete and cannot be cancelled once started.
Accessing the External Device's Menu
"
Availability depends on the specific model and area.
Once the TV has switched over to the selected device, you can access the device's menu using the
TV's remote control.
Press the MENU/123 button on the Samsung Smart Control, then select SOURCE on the On-Screen
Remote. On the Source screen, select the device, and then press and hold the Enter button. Select
Anynet+ (HDMI-CEC) from the list.
The following list appears, though it may differ based on the external device:
●
Anynet+ (HDMI-CEC)
Displays a list of HDMI-CEC-compliant devices connected to the TV. Select View TV to exit
Anynet+ (HDMI-CEC), and start watching TV. To switch to the screen of an external device,
simply select that respective device.
●
(Connected Device) Menu
Display the menu of the connected device. If the target device is a DVD player, the DVD menu is
shown.
●
(Connected Device) Tools
Displays a list of frequently-used functions available for the device. If the target device is a DVD
player, the DVD playback menu is shown.
"
Some external devices may not support this option.
●
(Connected Device) Title Menu
Display the connected device's title menu. If the target device is a DVD player, the DVD title menu
is shown.
"
Some external devices may not support this option.