4
English
Accessories
✎
Please make sure the following items are included with your LED TV. If any items are missing, contact your dealer.
✎
The items’ colours and shapes may vary depending on the model.
y Remote Control & Batteries (AAA x 2)
y Power Cord / Data Cable
y Owner's Instructions / Safety Guide
(Not available in all locations)
y RF Signal Gender (DIN,F Type)
y Quick Setup Guide
y Guide Stand
y Screws
y Stand
y Holder-Ring (2EA)
✎
The stand and stand screws may not be included depending on the model.
✎
The Data Cable may not be included depending on the SI Vendor.
Installing the LED TV Stand
The 32” and larger LED TVs have swivel stands. You can set these stands so that the TV swivels 20 degrees left and right, 60
degrees left and right, or 90 degrees left and right. See page 6. The 28” LED TVs do not have swivel stands.
Stand Components
When installing the stand, use the provided components and parts.
A-1
1 EA
HG32EB670, HG39EB670, HG46EB670
HG32EB675, HG39EB675, HG42EB675, HG46EB675
B
1 EA
C
X7 (M4 X L12)
E
HG32EB670
HG32EB675
1 EA
A-2
HG28EB670, HG28EB675
D
X8 (M4 X L12)
A-3
1 EA
HG32EB673
Stand Guide Stand Screws
Bolt + Nut
❑ Hotel Mount Kit
Short Bolt (2EA) Long Bolt (2EA) Nut (2EA) Washer (2EA)
Bolt + Nut
Top
Bottom
Mounting the stand to a flat surface such as a dresser top, desk top, or
entertainment center.
✎
Make su
re to distinguish between the front and back of the Stand and
Stand Guide when assembling them.
✎ Make sure that at least two people lift and move the LED TV.
✎ When connecting the stand, lay the product down on a soft surface, with
the screen facing, and then fasten the screws.
✎ The number of screws
may differ depending on the model.
[HB670-XC]Install Guide-ENG.indd 4 2013-03-27 11:24:17
To Next Page
Loading...
