To Next PageTo Next PageWhy won't my Samsung 7100 turn on?
First, ensure the AC power cord is securely plugged into both the wall outlet and the TV. Then, verify that the wall outlet is functioning correctly. Finally, press the 'P' button on the TV itself to rule out a remote control issue.
Why does my Samsung LED TV keep powering off by itself?
Disable the TV's energy efficiency and automatic off features. Check if the Sleep Timer (System > Time > Sleep Timer) is enabled. If not, check if No Signal Power Off (System > Eco Solution > No Signal Power Off) or Auto Power Off (System > Eco Solution > Auto Power Off) are enabled.
How to stop my Samsung 7100 LED TV from flickering and dimming?
Disable Energy Saving by navigating to System > Eco Solution > Eco Sensor and/or Energy Saving by navigating to System > Eco Solution > Energy Saving, then check the screen again.
What to do if there is no picture on my Samsung 7100?
First, check all cable connections by removing and reconnecting them to both the TV and any external devices. Ensure the video outputs of your external devices (like Cable/Sat Box, DVD, Blu-ray) match the TV's input connections. Also, make sure all connected devices are powered on and the correct input source is selected on the TV. If problems persist, try rebooting the connected device by unplugging it and then reconnecting its power cable.
How to fix a Samsung LED TV remote that is not working?
Try replacing the remote control batteries, ensuring they are installed with the correct polarity (+/–). Clean the sensor's transmission window on the remote. Lastly, point the remote directly at the TV from about 5 to 6 feet away.
Why is the screen color off on my Samsung 7100 LED TV?
Run a Self Diagnosis Picture Test (Support > Self Diagnosis > Picture Test). If the picture problem is caused by the TV, the problem should be visible in the Picture Test. If the problem is not visible, confirm that the TV's video input jacks are connected to the correct external video device output jacks and that none of the connections are loose. If possible, test your external video devices by connecting them to another TV.
How to find channels on my Samsung LED TV?
Try re-running the Setup (Go to Menu > System > Setup) or run Auto Program (Go to Menu > Broadcasting > Auto Program).
Why doesn’t my cable box remote work with my Samsung 7100 LED TV?
Program the Cable/Set remote control to operate the TV.
How to adjust screen brightness on Samsung LED TV?
Navigate to the Picture settings and adjust the Backlight, Contrast, Brightness, Sharpness, Color, Tint (G/R), and other picture quality settings to your preference.
General| Display Technology | LED |
|---|---|
| Smart TV | Yes |
| HDMI Ports | 3 |
| USB Ports | 2 |
| Wi-Fi | Yes |
| Motion Rate | 120 |
