Samsung 740N - Folie 36

8.DDC - Device Setting
8.DDC - Device Setting
1. Set your devices & M onitor
1. Set your devices & M onitor
2. A fter you set like the picture, you have to wait until
2. A fter you set like the picture, you have to wait until
‘
‘
Check Signal’ OSD runs in the screen.
Check Signal’ OSD runs in the screen.
3. Now push the button ‘M ENU & ’ , and then the LED lamp will blink. ∇
3. Now push the button ‘M ENU & ’ , and then the LED lamp will blink. ∇
4. This process should be done before updating DD C File
4. This process should be done before updating DD C File