Samsung 800 Series

20
Tidying Up the Connected Cables
1
2 3
4
4
4
Tilt the display, as shown in the figure. Rotate the product to the highest vertical
position.
Connect the corresponding cables. Arrange the cables through the groove on the
back of the product, and then attach the COVER-
REAR SUB (
). When you attach the COVER-
REAR SUB ( ), please aim six ribs of the COVER-
REAR SUB ( ) to the back of the product at first.
5
6
7
Arrange each of the two cables through either
side of the HOLDER-STAND CABLE, as shown in
the figure.
Rotate the product to the horizontal position. Assembly is complete.