Samsung 9 Series - Connecting to an Antenna

10
Getting Started
English
ANT OUT
VHF/UHF Antenna
Cable
or
 Operating specification for dual view
Main TV
DTV ATV Scart AV Comp. PC HDMI
Touch Control
DTV
◎ ● O O O O O
ATV X
△
X X O O O
SCART X X
△
X X X X
AV X X X △ X X X
Comp. X X X X
△
X X
PC X X X X X X X
HDMI X X X X X X
△
◎
●
○
△
X
: <Preview> and <Twin Display> are enabled. Note that only Free channels are available for <Preview>.
: <Preview> enabled. Only Free channels are available.
: <Preview> enabled. Free / Scrambled channels are available.
: <Twin Display> enabled.
: Disabled.
✎ Scart output: disabled when a Touch Control signal is outputted.
✎ The Touch Control screen will freeze a few seconds while the input source of the TV switches.
✎ A message appears saying “Not Supported Mode” if the network condition is poor. Check the network connection and
try again.
✎ <Twin Display> or <Preview> may be restricted on the touch control if one of the following functions or modes is
enabled on the TV:
– PVR, Media Play, Internet@TV, AllShare, or PC mode.
Connecting to an Antenna
When the TV is initially powered on, basic settings proceed automatically.
✎ Preset: Connecting the mains and antenna.
[UC9000]BN68-02820E-XN_ZF.indb 10 2010-05-24 오후 4:50:35