Samsung SyncMaster 9 Series User Manual (English)

Questions and Answers:

M
Michael EstradaAug 20, 2025
Why is there no sound on my Samsung Monitor TV, but the picture is fine?
- P
  Patrick PowersAug 20, 2025
  Set the Speaker Select option to TV Speaker in the Sound menu. If you are using an external device, check the device’s audio output option. If you are using a DVI to HDMI cable, a separate audio cable is required. If your TV has a headphone jack, make sure there is nothing plugged into it. Try rebooting the connected device by disconnecting, and then reconnecting the device’s power cable.
K
Kathleen RamosAug 22, 2025
What to do if my Samsung SyncMaster 9 Monitor speakers are making an inappropriate noise?
- O
  orozcoryanAug 22, 2025
  Check cable connections. Make sure a video cable is not connected to an audio input. A low signal level may cause sound distortion, so for antenna or Cable connections, check the signal information. You can also perform the Sound Test as explained.
E
Edgar StewartAug 25, 2025
Why does my Samsung SyncMaster 9 Monitor TV image not look as good as it did in the store?
- S
  Sylvia BartonAug 25, 2025
  The store displays are all tuned to digital, HD (high definition) channels. If you have an analog cable/set top box, upgrade to a digital set top box. Also, use HDMI or Component cables to deliver HD (high definition) picture quality. Cable/Satellite subscribers can try HD channels from the channel line up. If you have an Air/Cable Antenna connection, try HD channels after performing Auto program. You can also adjust the Cable/Sat box video output resolution to 1080i or 720p.
K
Kelly YoungAug 26, 2025
What to do if my Samsung SyncMaster 9 Monitor picture is distorted with macro block errors, small blocks, dots, or pixelization?
- B
  brianhunterAug 26, 2025
  Picture distortion, especially in fast-moving scenes, can be caused by video content compression. Weak signal levels or poor signal quality can also distort the picture. Additionally, mobile phones used close to the TV (within 3.3 ft) may cause noise in the picture on analog and digital channels.
D
Douglas SotoAug 28, 2025
What to do if my Samsung SyncMaster 9 has poor color or brightness?
- D
  Danielle TaylorAug 28, 2025
  Adjust the Picture options in the TV menu (go to Picture Mode / Color / Brightness / Sharpness). You can also adjust the Energy Saving option in the TV menu (go to MENU – System – Eco Solution – Energy Saving). Alternatively, try resetting the picture to view the default picture settings (go to MENU - Picture - Reset Picture).
C
Christopher RiveraAug 30, 2025
Why does my Samsung SyncMaster 9 TV turn off automatically?
- J
  Jack SmithAug 30, 2025
  Ensure the Sleep Timer is set to Off in the System menu. If your PC is connected to the TV, check your PC power settings. Also make sure the AC power cord is plugged in securely to the wall outlet and the TV. When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there is no signal.
M
Ms. Michelle GonzalezSep 1, 2025
What to do if my Samsung Monitor is not receiving all channels?
- M
  Michael LongSep 1, 2025
  Make sure the coaxial cable is connected securely. Run Auto Program to add available channels to the channel list. Verify the antenna is positioned correctly.
D
Dr. Joshua HudsonSep 3, 2025
How to fix purple/green rolling horizontal bars and buzzing noise from the Samsung Monitor TV speakers with a Component cable connection?
- W
  Wayne HillSep 3, 2025
  Remove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-top-box has a grounding issue. You can also replace the Component video cables with an HDMI connection.
J
Joshua TranSep 5, 2025
How to resolve a 'Mode Not Supported' message on a Samsung SyncMaster 9?
- S
  Sydney ReyesSep 5, 2025
  Set your PC’s output resolution so it matches a resolution supported by the TV.
C
carolforbesSep 7, 2025
What to do if there is a dotted line on the edge of the screen of my Samsung SyncMaster 9 Monitor?
- D
  David ColonSep 7, 2025
  If the picture size is set to Screen Fit, change it to 16:9. You can also try changing the cable/satellite box resolution.