Samsung AC BNZDCH Series - Page 44

44
English
Installation Procedure
Installation
Steps Remote control display
13. Set the SEG16 and SEG17 values:
a. Set the SEG16 value by pressing the
(Low Fan) button repeatedly until the value
you want to set appears on the remote control display.
SEG16
b. Set the SEG17 value by pressing the (High Fan) button repeatedly until the value
you want to set appears on the remote control display.
When you press the
(Low Fan) or (High Fan) button, values appear in the
following order:
SEG17
14. Press the (Mode) button. Dry and Off appear on the remote control display.
15. Set the SEG18 and SEG20 values:
a. Set the SEG18 value by pressing the
(Low Fan) button repeatedly until the value
you want to set appears on the remote control display.
SEG18
b. Set the SEG20 value by pressing the (High Fan) button repeatedly until the value
you want to set appears on the remote control display.
When you press the
(Low Fan) or (High Fan) button, values appear in the
following order:
SEG20
16. Press the (Mode) button. Fan and Off appear on the remote control display.
DB68-11271A-02_IM_CAC Universal AHU Indoor_AA_EN_.indd 44 2022-09-15 오전 9:53:27