Samsung AC BNZDCH Series - Page 45

45
English
Installation
Steps Remote control display
17. Set the SEG21 and SEG22 values:
a. Set the SEG21 value by pressing the
(Low Fan) button repeatedly until the value
you want to set appears on the remote control display.
SEG21
b. Set the SEG22 value by pressing the (High Fan) button repeatedly until the value
you want to set appears on the remote control display.
When you press the
(Low Fan) or (High Fan) button, values appear in the
following order:
SEG22
18. Press the (Mode) button. Heat and Off appear on the remote control display.
19. Set the SEG23 and SEG24 values:
a. Set the SEG23 value by pressing the
(Low Fan) button repeatedly until the value
you want to set appears on the remote control display.
SEG23
b. Set the SEG24 value by pressing the (High Fan) button repeatedly until the value
you want to set appears on the remote control display.
When you press the
(Low Fan) or (High Fan) button, values appear in the
following order:
SEG24
DB68-11271A-02_IM_CAC Universal AHU Indoor_AA_EN_.indd 45 2022-09-15 오전 9:53:27