Samsung AC***KNLDCH - Troubleshooting; LED Display Error Codes

43
ENGLISH
t Press button anytime during setup to exit without setting.
t Option code will not be applied if you don't press
button.
t Setting Installation option code is available only with a master wired remote controller.
t Setting Installation option code is available when there is one on one connection between a wired
remote controller and an indoor unit.
NOTE
Option SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
Explanation PAGE Use of drain pump Use of Hot Coil
Use of Electric
Heater
Controller variables for auxiliary
heater
RESERVED
Indication
and Details
Indication Details Indication Details Indication Details Indication Details
Indication
Details
1
0 Disuse 0 Disuse 0 Disuse
Set temperature
for auxiliary
heat on
Time delay
for auxiliary
heat on
0
No temperature
oset
No delay
1
No temperature
oset
10 minutes
2
No temperature
oset
20 minutes
1 Use 1 Use 1 Use
3 1.5°C
No delay
4 1.5°C 10 minutes
5 1.5°C 20 minutes
6 3°C No delay
7 3°C 10 minutes
8 3°C 20 minutes
2 Use + 3minute delay - - 2
Use
(Heater
time
delay)
9 4.5°C
No delay
A 4.5°C 10 minutes
B 4.5°C 20 minutes
C 6°C No delay
D 6°C 10 minutes
E 6°C 20 minutes
Option SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
Explanation PAGE Use of external control
Setting the output
of external control
S-Plasma ion Buzzer control
Number of hours
using lter
Indication
and Details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
2
0
Disuse
Slave
(disable
Level
control*)
0
Thermo
on
0 Disuse 0 Use of buzzer 2
1000
Hour
2000
Hour
1
On/O
control
2 O control
3
Window on/
o control
4 Disuse
Master
(enable
Level
control*)
1
Operation
on
1
Use 1 Non use of buzzer 6
2000
Hour
5
On/O
control
6 O control
7
Window on/
o control
Option
SEG19 SEG20 SEG21 SEG22 SEG23 -
Explanation PAGE control of a remote controller
Heating setting
compensation
RESERVED
Away Set OFF Timer -
Indication
and Details
Indication Details Indication Details Indication Details Indication Details -
3
0 or 1 Indoor 1 0 Disuse 0 or 1 Auto Set OFF 30Min.
-
2 Indoor 2 1 2°C 2 Auto Set OFF 60Min.
3 Indoor 3
2 5°C
3 Auto Set OFF 120Min.
4 Indoor 4 4 Auto Set OFF 180Min.
5. Press the button to save and complete the option setting.
6. Press the
button to exit to normal mode.