28
Variety Smart Features
Smart FeaturesSmart Features
Clean function
Use the Clean function to remove moisture from the inside of the air
conditioner for preventing propagation of fungi, bacteria, etc.
▶ ▶
Select
Clean.
▶
NOTE
• Depending on the condition of the indoor unit, the Clean operation
stops after running for 30 seconds to 20 minutes.
• When the Clean Function is set, the indoor unit displays "Cl".
When the Clean function is cancelled, the indoor unit displays
nothing.
• You cannot use the Clean function after starting the Timed Off or
good'sleep function.
• If you turn on the air conditioner and then turn it off within
20seconds, the Clean function does not operate.
• When the air conditioner is turned off, the Clean function operates
immediately. When it is turned on, the Clean function operates after
it is stopped.
• Once the Clean function is started, it automatically continues to
operate until it is cancelled.
CAC001-00_IB_RAC QMD_EU_EN-WEB_.indd 28 2020-02-05 오후 12:54:40
To Next Page
Loading...
