Samsung AC TNXDKG Series - Cleaning; Auto Clean Function

33
English
Cleaning and MaintenanceCleaning and Maintenance
Cleaning
Auto clean function
Use the Clean function to remove moisture from the inside of the air
conditioner for preventing propagation of fungi, bacteria, etc.
▶ ▶
Select
Clean.
▶
NOTE
• Depending on the condition of the indoor unit, the Clean
operation stops after running for 30 seconds to 20 minutes.
• When the Clean function is set, the Timer LED on the indoor unit
blinks 3 times for 3 seconds (OFF → ON → OFF → ON → OFF → ON
→ OFF → returns to the previous state). When the Clean function
is cancelled, the Timer LED on the indoor unit blinks once for 1
second (OFF → ON → OFF → returns to the previous state).
• You cannot use the Clean function after starting the Timed Off or
good'sleep function.
• If you turn on the air conditioner and then turn it off within
20seconds, the Clean function does not operate.
• When the air conditioner is turned off, the Clean function
operates immediately. When it is turned on, the Clean function
operates after it is stopped.
• Once the Clean function is started, it automatically continues to
operate until it is cancelled.
CAC001-00_IB_RAC QMD_EU_EN-WEB_.indd 33 2020-02-05 오후 12:54:42