What to do if my Samsung Air Conditioner system stops due to discharge temperature?
If your Samsung Air Conditioner system stops because of the discharge temperature, it requires activities exclusively for Authorized Service Center.
What to do if there is a communication error between Samsung AC024JXADCH Air Conditioner indoor and outdoor unit?
If you're experiencing a communication error between the indoor and outdoor units of your Samsung Air Conditioner, and tracking has been completed with no response from the indoor units, the solution is to check the electrical connection and settings between the indoor and outdoor units.
What to do if my Samsung AC024JXADCH system stops due to full current control?
If your Samsung Air Conditioner system stops due to full current control, it requires activities exclusively for Authorized Service Center.
What to do if my Samsung Air Conditioner detects a blockage on the high-pressure pipe?
If a blockage is detected on the high pressure pipe of your Samsung Air Conditioner, it requires activities exclusively for Authorized Service Center.
What to do if my Samsung AC024JXADCH Air Conditioner displays a communication error between the outdoor unit inv and main micom?
If your Samsung Air Conditioner displays a communication error between the outdoor unit inv and main micom (specifically for PF #4~#6 controller, where the error is determined from when the compressor turns on), it requires activities exclusively for Authorized Service Center.
What to do if my Samsung Air Conditioner detects compressor overload prevention?
If your Samsung Air Conditioner detects compressor overload prevention, it requires activities exclusively for Authorized Service Center.
What to do if my Samsung AC024JXADCH Air Conditioner is not Smart installed?
If your Samsung Air Conditioner indicates that Smart install is not installed, it requires activities exclusively for Authorized Service Center.
What to do if my Samsung AC024JXADCH system stops due to overload protection control?
If your Samsung Air Conditioner system stops due to overload protection control, it requires activities exclusively for Authorized Service Center.
What to do if my Samsung Air Conditioner shows an error on the outdoor temperature sensor?
If your Samsung Air Conditioner displays an error on the outdoor temperature sensor (short or open), it requires activities exclusively for Authorized Service Center.
What to do if my Samsung AC024JXADCH Air Conditioner has fan speed error?
If your Samsung Air Conditioner has a fan speed error, it requires activities exclusively for Authorized Service Center.
General| Brand | Samsung |
|---|---|
| Model | AC024JXADCH |
| Category | Air Conditioner |
| Language | English |
General warnings and precautions for safe operation and handling of the unit.
Specific safety measures and warnings during the installation process.
Guidelines for safe electrical connections and power supply.
Recommendations for choosing the optimal location for the outdoor unit.
Procedures for connecting electrical power and communication cables to the unit.
Guidelines for refrigerant piping length and height differences.
Steps for charging refrigerant into the system.
Process for connecting pipes and removing air from the refrigeration circuit.
Methods for testing the system for refrigerant leaks using nitrogen or R-410A.
Running and stopping various test modes like heating, cooling, and inverter checks.
Lists and explains error codes displayed by the outdoor unit's PCB.
To Next Page