Samsung AC026JNNCEH - Setting an Indoor Unit Installation Option (Suitable for the Condition of(each Installation Location)

Samsung Electronics 4-5
1. Check whether power is supplied or not.
- When the indoor unit is not plugged in, there should be additional power supply in the indoor unit.
2. The panel(display ) should be connected to an indoor unit to receive option.
3. Set the installation option according to the installation condition of an air conditioner.
- The default setting of an indoor unit installation option is “02000-100000-200000-300000”.
- Individual control of a remote controller(SEG20) is the function that controls an indoor unit individually when there is
more than one indoor unit.
- No need to assign SEG3, 6, 9, 10, 11, 16, 21, 22, 23, 24 which are non applicable. Even though those segments are set,
they will be ignored.
- If you set the applicable segments with numbers other than the indiciated, the initial setting will be maintained.
4. Set the indoor unit option by wireless remote controller.
4-1-3 Setting an indoor unit installation option (suitable for the condition of each installation location)
Option No. : 02XXXX-1XXXXX-2XXXXX-3XXXXX
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE
RESERVED
Useofexternal
temperature sensor
Useofcentral
control
RPMsetting
compensation
Indication
and
Details
Indication Details Indication Details Indication Details Indication Details
0. Not used
1. High ceiling mode
2. High ceiling kit
3. Low noise operation mode
0 2
0 Disuse 0 Disuse
1 Use 1 Use
Option SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
Explanation PAGE Useofdrainpump
RESERVED RESERVED RESERVED
Master/Slave
Indication
and
Details
Indication Details Indication Details Indication Details
1
0 Disuse 0 slave
1 Use 1 master
2
Use+
3minute
delay
Option SEG13 SEG14 SEG15 SEG16 SEG17 SEG18
Explanation PAGE
Useofexternal
control
Setting the output
ofexternalcontrol
S-Plasma ion Buzzer control
Numberofhours
using lter
Indication
and
Details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
2
0 Disuse 0
Thermo
on
0 Disuse 0 Useofbuzzer 2 1000Hour
1
ON/OFF
Control
1
Operation
on
1 Use 1
Nonuse
of buzzer
6
2000
Hour
2
OFF
Control