3-2 Samsung Electronics
No Parts Procedure Remark
1 Panel 1) Pull both hooks and take the grille downward.
Two safety clips are mounted to the front grille
to prevent it from dropping.
2) Detach the safity clip and take up the grille.
3) Remove the 2 fixed screws to remove the
Control-Box Cover. (Use +Screw Driver)
4) Remove the remote control-receiver , blade
conector and humidity sensor wires from the
PBA. (4EA)
5) Push the 4 panel corners and cover downwards
to remove it.
3-1 Indoor unit
■ AC026NNNDKH, AC035NNNDKH, AC052NNNDKH, AC060NNNDKH, AC071NNNDKH
To Next Page
Loading...
