To Next PageTo Next PageWhat should I check for indoor unit Eva In sensor (Open/Short) error in Samsung Heating System?
If your Samsung Heating System shows an indoor unit Eva In sensor (Open/Short) error, check the indoor unit Eva in sensor location.
How to troubleshoot compressor V limit error on Samsung Heating System?
If your Samsung Heating System displays a compressor V limit error, check the compressor connection status and the resistance between different phases of the compressor.
What to do if [Inverter] IPM over current error occurs in Samsung Heating System?
If you are encountering an IPM over current error on your Samsung Heating System, verify the coolant charging status. Also, check the compressor connection and ensure it's operating normally. Inspect for any obstructions around the indoor and outdoor units. Confirm that the outdoor unit service valve is open and that the indoor/outdoor installation pipe and wiring are correctly installed.
What to do if Samsung Heating System detects OUTDOOR UNIT compressor freezing?
If your Samsung Heating System detects outdoor unit compressor freezing, check the cycle status, specifically if the outdoor unit (condenser) is frozen. Inspect the condenser.
What to do for indoor unit address setting error in Samsung Heating System?
If you encounter an indoor unit address setting error on your Samsung Heating System, check the address setting of the indoor units.
How to resolve [Inverter] compressor rotation error in Samsung Heating System?
If your Samsung Heating System reports an inverter compressor rotation error, check the compressor connection status and the resistance between different phases of the compressor.
What to do when Samsung Heating System compressor goes down due to high pressure?
If the compressor shuts down due to high pressure in your Samsung Heating System, check the cycle status.
How to fix indoor unit communication error on Samsung Heating System?
To address an indoor unit communication error in your Samsung Heating System: * Check the communication cable of the indoor unit. * Check the DC output voltage at the communication terminal.
How to troubleshoot outdoor fan 2 error on Samsung Heating System?
If your Samsung Heating System displays an outdoor fan 2 error, check the input power connection status. Verify the connection status of the motor and the outdoor unit PCB. Also, check the indoor/outdoor unit fuse.
How to fix [Inverter] compressor startup error in Samsung Heating System?
If you're experiencing a compressor startup error on your Samsung Heating System, check the compressor connection status. Also, check the resistance between different phases of the compressor.
General| Brand | Samsung |
|---|---|
| Model | AE060RXEDEG |
| Category | Heating System |
| Language | English |
Guidelines for servicing the equipment, ensuring proper procedures and safety.
Warnings about static electricity and product liability during repair.
Essential safety measures to prevent electric shock, fire, and injury during operation.
Safety procedures for handling refrigerants to protect health and the environment.
Safety guidelines for brazing operations, including material handling and gas usage.
Procedures and safety measures for charging refrigerants into the system.
Highlights the key features and technologies of the Eco Heating System.
Detailed technical specifications for outdoor and hydro units.
Lists specifications and details for optional accessories available for the system.
Step-by-step guide for disassembling and reassembling the hydro unit.
Detailed instructions for disassembling and reassembling the outdoor unit.
Troubleshooting guide for error codes displayed on the wired remote controller.
Diagnostic steps based on observed system symptoms and errors.
Troubleshooting specific to the Hydro Unit and its components.
Pre-diagnostic checks and operational modes for system assessment.
Further troubleshooting guidance based on specific error codes and symptoms.
Visual representation of the PCB layout for the Hydro Unit with component identification.
Diagram of the MAIN PCB for the Outdoor Unit with component labels.
Wiring schematics for Tank Integrated Hydro Units.
Wiring diagrams for the Outdoor Unit, covering different phase types.
Guide to understanding model codes and their components.
Schematic and component list for the split tank integrated hydro unit.
Schematic and component list for the mono tank integrated hydro unit.
System diagram and component list for the split Hydro Unit.
Procedure for checking and updating FSV data using S-NET Pro2 software.
Instructions for exporting and importing EHS FSV values using XML files.
