Disassembly and Reassembly
Samsung Electronics 3-27
No Parts Procedure Remark
7 Cabinet Back LF
1) ) Unscrew the 2 fastening screw of the Cabinet
Back LF to detach. (Use +screw driver)
8 Ass’y Control Out
1) Detach the 4 housings connected to the Ass'y
Control Out.
2) Detach the cables of the Comp and the
Solenoid Coil, Reactor .
When detaching the BLDC motor connector
from the PBA, please do so 30 seconds after
removing the power cord. Do not detach or
insert the Motor connector while power is
being supplied to the PBA.
3) Unscrew the 2 fastening screws of the Ass'y
Control Out to detach.
(Use +Screw Driver)
To Next Page
Loading...
